产品简介Product Introduction
SGFA10型预灌封生产线是中高产能全自动巢盒预灌封注射器的理想解决方案。全自动拆外包机、全自动开盒机和全自动灌封机,可以组成一条体积小方便使用的巢盒注射器生产线。
采用尊龙凯时预灌封生产线进行一次性药液的灌装与密封,可以降低药液额外灌装量,且使用时药液残留量小,可以提高药液使用率。采用巢盒免洗免灭注射器瓶,无需进行瓶子的清洗、灭菌,因此不必配置清洗机、隧道烘箱等设备,不仅可以降低设备成本,而且也可以降低污染风险。灌装工位紧临加塞工位,可实现灌装后即加塞,药液暴露时间短,污染风险更小。亦可搭配真空加塞、真空充氮,可以满足对氧气残留量要求极高的药品,实现残氧量小于 1%的指标。
SGFA10 type pre-filled syringe production line is an ideal solution for automatic nested pre-filled syringe and features medium and high production capacity. The production line is mainly composed of automatic unpacking machine, automatic box opening machine and automatic filling and sealing machine. Using the pre-filled syringe production line of Shinva to fill and seal liquid medicine at one time can reduce the additional filling amount of liquid medicine, and reduce the residual amount of liquid medicine, which can improve the use rate of liquid medicine. The use of wash-free and sterilization-free nested syringe eliminates the need for bottle cleaning and sterilization, so it is not necessary to configure cleaning machines, tunnel ovens and other equipment, which can not only reduce the cost of equipment, but also reduce the risk of pollution. The filling station is close to the stoppering station, which can realize stoppering immediately after filling. The exposure time of the liquid medicine is short, and the pollution risk is less. It can also be equipped with vacuum stoppering and vacuum nitrogen filling functions, which can meet the high requirements for drugs on residual oxygen content and achieve the target of residual oxygen content less than 1%.
产品优势Product Advantages
拆外包过程中巢盒从外袋推出后,直接进入B+A灌封间,巢盒不跨区。
In the process of unpacking, the nest box is pushed out of the outer bag and syringes directly enters the filling and sealing area of grade B+A, and the nest box does not cross the area.
外袋收集箱具备声光提醒功能。
The outer bag collection box has sound and light reminding function.
撕膜机械手自主设计生产制造,售后服务便捷迅速。
The film tearing manipulator is designed and manufactured independently, and the after-sales service is convenient and fast.
集成机器人运动控制系统,动作稳定响应迅速,性能可靠。
Integrated robot motion control system, stable and fast response, reliable performance.
巢板微动平台采用双伺服设计,响应准确迅速,定位精度高。
Nest plate inching platform adopts double servo design, with accurate and rapid response and high positioning accuracy.
龙门架型灌装加塞结构,寿命长,免维护。
Gantry type filling and stoppering structure, long service life, maintenance free.
供塞料斗采用真空吸附设计,料斗盘极速拆装。
The stopper hopper is designed with vacuum suction, and the hopper plate can be disassembled and assembled at high speed.
无泵灌装系统No Pump Filling System
灌装精度可高达0.2%
Filling accuracy can reach up to 0.2%
灌装精度可高达0.2%,是国家标准的10倍,同类产品最高可做到1%。
The filling accuracy can reach up to 0.2%, which is 10 times the national standard, and similar products can achieve a maximum of 1%.
磨损微粒减少94%
94% reduction in wear particles
连续运行10小时后5um微粒数为68/cm³同类产品相同方法检测数据为1180 /cm³。
After continuous operation for 10 hours, the particle count at 5um is 68/cm³ The testing data for similar products using the same method is 1180/cm³.
剪切破坏减少90%
90% reduction in shear failure
一次灌装循环内,无泵灌装系统只挤压一次蛋白分子,蠕动泵挤压10次以上。
During a filling cycle, the non pump filling system only compresses protein molecules once, while the peristaltic pump compresses more than 10 times.
操作时间减少73%
73% reduction in operation time
陶瓷泵10针的拆装时间约为30分钟,采用智能灌装系统后拆装时间为8分钟。
The disassembly and assembly time for the ceramic pump with 10 needles is about 30 minutes, and after using the intelligent filling system, the disassembly and assembly time is 8 minutes.